EasyManuals Logo

Teka HSC 644 C User Manual

Teka HSC 644 C
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8
4. Touch any key to stop the alarm. The
symbol will then disappear.
If you wish to modify the time on the buzzer,
press or until the flash and the
hours are not flashing; then press and
repeat the steps shown. Upon entering the
timer control, the time currently remaining will
appear which you will be able to adjust.
Programing Cooking Time
1. Select a function and a cooking
temperature using the oven commands.
2. Press or until the symbol on the
display starts flashing, then press . The
0_00
display.
3. Select the time after which you want the
alarm to sound by pressing or . You
will hear 2 beeps to confirm that the time
has been set and the clock will start
counting down from the selected time.
The symbol will flash slowly.
4. Once the cooking time is up, the oven will
turn off, an alarm will sound and the
symbol will flash.
5. Press to stop the alarm and turn off
the symbol. The oven will switch on
again.
6. Set the controls to position to turn off
the oven.
You can change the remaining cooking time
at any time by touching or until the
symbol starts to flash quickly. Press
to change the time.
Programing the Cooking Stop Time
1. Select a cooking function and a
temperature.
2. Press or until the symbol on the
display starts flashing, then press .
0_00
display.
3. Select the time after which you want the
alarm to sound by pressing or . You
will hear 2 beeps to confirm that the time
has been set and the clock will start
counting down from the selected time.
The symbol will flash slowly.
4. When the cycle is finished, the oven will
turn itself off, an alarm will sound and the
symbol will flash quickly.
5. Press to stop the alarm and turn off
the symbol. The oven will switch on
again.
6. Set the controls to position to turn off
the oven.
You can change the remaining cooking time
at any time by touching or until the
symbol starts to flash quickly. Press
to change the time.
Programing the Cooking Time and
Cooking Stop Time
1. Select a cooking function and a
temperature.
With the Buzzer function, the oven will not
turn off when the time expires.
With the Buzzer function, the remaining
time will show permanently on the
display. With this programed function, it is
not possible to view the time or the total
programed cooking time.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Teka HSC 644 C and is the answer not in the manual?

Teka HSC 644 C Specifications

General IconGeneral
BrandTeka
ModelHSC 644 C
CategoryOven
LanguageEnglish

Related product manuals