How to fix a Teka LP8 650 WH TTH that won't start?
If your Teka Dishwasher program isn't starting, there are several things to check: * Ensure the dishwasher is properly plugged in. * Make sure the dishwasher is switched on using the On/Off button. * Check your indoor fuses. * Verify that the water inlet tap is open. * Confirm that the dishwasher door is fully closed. * Inspect the water inlet hose and machine filters for any clogs.
Why does my Teka LP8 650 WH TTH Dishwasher leave food on dishes?
If your Teka Dishwasher leaves partial food wastes on the dishes, consider the following: * Avoid overloading the baskets to ensure proper water spray coverage. * Arrange dishes as instructed in the loading guidelines, preventing them from leaning against each other. * Use the correct amount of detergent, following the programme table's instructions. * Select the most appropriate wash programme based on the programme table. * Clean the spray arms' holes with thin objects to remove any food waste blockages. * Ensure the drain hose and filters are correctly fitted and not clogged.
What to do if water remains inside Teka Dishwasher?
If water remains inside your Teka Dishwasher, try these steps: * Check the drain hose for clogs or twists; clean or untwist it as needed. * Clean the filters to ensure they are free of debris. * Wait until the program is fully finished, as it may still be in progress.
How to remove whitish stains from dishes in Teka Dishwasher?
To remove whitish stains from dishes in your Teka Dishwasher: * Use the correct amount of detergent as instructed in the programme table. * Increase the rinse aid dosage and/or water softener level. * Increase the water softener level and add salt if you have high water hardness. * Make sure the salt compartment cap is closed properly.
Why Teka LP8 650 WH TTH doesn't dry dishes?
If your Teka Dishwasher isn't drying dishes effectively: * Ensure that you have selected a programme with a drying option. * Increase the rinse aid dosage setting.
Why are there rust stains on dishes from my Teka LP8 650 WH TTH Dishwasher?
If rust stains are forming on dishes in your Teka Dishwasher, consider these factors: * Ensure you are using only dishwasher-proof sets, as the stainless-steel quality of some dishes may be insufficient. * Adjust the water hardness level using the water hardness table if there's a high level of salt in the wash water. * Check that the salt compartment cap is closed properly. * Use a funnel when filling the salt compartment to avoid spillage. * Consult a qualified electrician immediately if you suspect a poor mains grounding.
What causes my Teka LP8 650 WH TTH Dishwasher to stop mid-cycle?
If your Teka Dishwasher stops during washing, check the following: * Check the mains power supply for any issues. * Ensure the water tap is on and supplying water.
How to stop Teka LP8 650 WH TTH Dishwasher from making shaking noises?
If you hear shaking and hitting noises during a wash operation in your Teka Dishwasher, the spray arm might be hitting dishes in the lower basket. Try moving or removing items that are blocking the spray arm.
Why does detergent remain in the compartment of my Teka Dishwasher?
If detergent remains in the detergent compartment of your Teka Dishwasher, make sure the detergent compartment is dry before adding detergent.
General| Type | Freestanding |
|---|---|
| Noise Level | 49 dB |
| Dimensions (HxWxD) | 85 x 60 x 60 cm |
| Color | White |
| Drying Efficiency Class | A |
| Delay Start | Yes |
| Half Load Option | Yes |
To Next Page
