Teka ML 820 BIS User Manual

7
EN
Installation
 The electrical installation is to be set up so that the
appliance can be isolated from the mains with a minimum
3mm all-pole contact separation. Suitable separation
devices include e.g. c
installation must comply with current regulations.
 If the electrical connection is done through a plug and this
remains accessible after installation, then it is not
necessary to provide the mentioned separation device.
 The installation must comply with current regulations.
 Protection against electric shock must be provided by the
electrical installation.
 WARNING! The oven must be earthed.
 WARNING! The appliance is intended to be built in. Please
refer to the last pages of this user manual for detailed
information on the installation dimensions.
Cleaning and Maintenance
 WARNING! Cut the power supply before cleaning and
maintenance.
 The appliance should be cleaned regularly and any food
deposits removed.
 Failure to maintain the appliance in a clean condition could
lead to deterioration of the surface that could adversely
affect the life of the appliance and possibly result in a
hazardous situation.
 Do not use harsh abrasive cleaners or sharp metal scrapers
to clean the glass door since they can scratch the surface,
which may result in shattering of the glass.
 Do not use a steam cleaner to clean the appliance.

Teka ML 820 BIS Specifications

General

Material	Stainless steel
Door color	Black
Grill type	Quartz grill
Control type	Rotary, Touch
Display type	TFT
Product type	Grill microwave
Product color	Black, Stainless steel
Timer duration	90 min
Turntable size	240 mm
Microwave power	700 W
Built-in display	Yes
Appliance placement	Built-in
Inverter technology	-
Number of power levels	5
Connected load	- W

Weight and Dimensions

Depth	390 mm
Width	595 mm
Height	334 mm