Teka ML 820 BIS User Manual

8
 The door contact surfaces (the front of the cavity and the
inside part of the doors) must be kept very clean in order to
ensure the oven functions correctly.
 Please follow the instructions regarding cleaning in the
section "Oven Cleaning and Maintenance".
 WARNING: Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric shock.
Please refer to the chapter "CHANGING THE OVEN LIGHT
BULB".
Service and Repair
 WARNING! Cut the power supply before repair.
 WARNING! Only a competent person can carry out any
service or repair operation that involves the removal of a
cover which gives protection against exposure to
microwave energy.
 WARNING! If the door or door seals are damaged, the
appliance must not be operated until it has been repaired
by a competent person.
 If the power cable is damaged it should be substituted by
the manufacturer, authorized agents or technicians
qualified for this task in order to avoid dangerous situations.
 Repair and maintenance work, especially of current
carrying parts, can only be carried out by technicians
authorized by the manufacturer.
Avoid damaging the oven or other dangerous situations by
following these instructions
 Never switch on the microwave when it is empty. If there is
no food inside there may be an electrical overcharge and
the oven could be damaged. RISK OF DAMAGE!

Teka ML 820 BIS Specifications

General

Material	Stainless steel
Door color	Black
Grill type	Quartz grill
Control type	Rotary, Touch
Display type	TFT
Product type	Grill microwave
Product color	Black, Stainless steel
Timer duration	90 min
Turntable size	240 mm
Microwave power	700 W
Built-in display	Yes
Appliance placement	Built-in
Inverter technology	-
Number of power levels	5
Connected load	- W

Weight and Dimensions

Depth	390 mm
Width	595 mm
Height	334 mm