EasyManua.ls Logo

Teka TMW 22.1 BIT - Oven Operation Management; During Operation Adjustments; Interrupting Oven Operation

Teka TMW 22.1 BIT
92 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46
During operation...
The oven door may be opened at any time during the cooking operation, in which case:
THE PRODUCTION OF MICROWAVE POWER IS IMMEDIATELY HALTED;
The grill is switched, but remains at a high temperature;
but remains at a high temperature;but remains at a high temperature;
but remains at a high temperature;
The Timer is automatically stopped indicating the remaining cooking time.
If necessary, it is now possible to:
Stir or shake the food in order to improve uniform cooking;
Adjust the microwave power level by pressing the pre– (13
1313
13) or + (12
1212
12) keys;
Select another function, by pressing the function keys (2
22
2, 3
33
3, 4
44
4, 5
55
5, 6
66
6, 7
77
7 or 8
88
8);
Adjust the remaining operating time by turning the ROTARY control (9
99
9).
Close the door again and press the START key (15
1515
15). The oven will commence operation once again.
Interrupting Oven Operation
In order to stop oven operation before the end of the programmed time, press the STOP key (14
1414
14) or open
the door.
If you do not intend to continue heating the food, then close the door and press the STOP key once
again(14
1414
14). The oven will beep and the Screen (1
11
1) will display the clock.
At the end of the operating time, the oven will switch off, beep three times and the Screen (1
11
1) will display
the word End
EndEnd
End”. The beeps are repeated every thirty seconds until the door is opened or the STOP key (14
1414
14)
is pressed.
Energy Saving
This microwave has a special energy-saving mode which cuts in automatically after ten minutes of inactivity.
In energy-saving mode, all the keys on the panel go off and the display (1) shows the time.
This function is automatically deactivated when the user presses a function key.
Energy-saving mode is also activated by pushing the rotating knob (9) into its inner position. In this position
the keys remain off, the keyboard is deactivated and the display (1) shows the time.
To switch the microwave back on, just press the rotating knob (9) again, leaving it in its outer position.

Table of Contents

Related product manuals