TEKMAGIC W22 - Local Time Setup; Initiate Time Setting (Seconds); Set Hour

Shenzhen Dawu Times Technology Co., Ltd
2/103 www.wiseupshop.com
II. Local Time Setup
2.1 In the local time display mode, hold down the SET button till you see the second digit is
blinking, then press the ADJ button to clear the second digit or you could skip to the next
step.
2.2 Press the MODE button once, you will see the hour digit starts blinking, then press the
ADJ button to set the hour.
2.3 Press the MODE button once again, you will see the minute digit starts blinking, then
press the ADJ button to set the minute.