EasyManuals Logo

Tekmar 518 Installation & Operation Manual

Tekmar 518
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Thermostat 518
Installation & Operation Manual
518
_
D
03/13
Zoning
Replaces: New
© 2013
518_D - 03/13
1 of 12
A Watts Water Technologies Company
The Thermostat 518 accurately controls the
room temperature for a hydronic heating
zone using Pulse Width Modulation (PWM)
technology. Simple up and down buttons
and a display with large type make this
thermostat easy to read and use. The 518
automatically detects a single auxiliary
sensor to measure either outdoor, floor
or remote room temperature. This easy to
install thermostat is a direct replacement
for tekmar Thermostats 507 and 508.
Introduction
Energy Saving Features
Auto Heating Cycle
Additional Features
Radiant Floor Heating
Pulse Width Modulation
Auxiliary Sensor Input
Outdoor & Floor Temperature
Display
Backlight
Freeze Protection

Other manuals for Tekmar 518

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tekmar 518 and is the answer not in the manual?

Tekmar 518 Specifications

General IconGeneral
CategoryThermostat
TypeProgrammable
Voltage24 VAC
DisplayLCD
Programming7-day Programmable
ApplicationResidential
Temperature Range40°F to 90°F
Power SourceHardwired
Wiring2-wire
Dimensions4.5 x 3.5 x 1 inches (114 x 89 x 25 mm)

Related product manuals