teko Hover Scrubber Omni - Usage Guide

CONTACT CUSTOMER CARE 1+(619)449-2392
Assembly Guide:
Step 3
Attachments
A detailed guide to assembly
If using a water/cleaning solution
Can also use dry
Usage Guide:
A detailed guide to usage
3A
Power wedge base
-attach the power wedge
base to the underside of
the main unit by snapping
into place.
3B
Attach desired pads to
the underside of the main
unit. Align and center the
pads- securely attach
to the hook and loop tape
that is mounted on the
main unit discs and power
wedge.
3C
To attach the baseboard
duster, align the magnets to
the front of the main unit-it
will click into place. The “fins”
on the baseboard attachment
keep it securely positioned.
Attach the baseboard pad to
the hook and loop tape on
the baseboard attachment.
spray
directly
on pads
spray
directly
on surface
3C
shown with attached
baseboard duster
“fins”
magnets
DO NOT
SUBMERGE
HOVER SCRUBBER
OMNI INTO WATER
3A
snap power wedge
base into underside
shown with attached
power wedge base
3B
shown with pads