Need help?Do you have a question about the TekPower TP3016M Series and is the answer not in the manual?
Details the layout and components of the device's front panel.
Instructions for verifying accessories and initial power-on checks before operation.
Basic steps to get the power supply operational and verify its output functionality.
Procedures to verify voltage regulation, constant current, and short circuit protection.
Lists key electrical and physical parameters of the power supply unit.
Provides additional operational and environmental details, such as calibration frequency and temperature ranges.
Explains the function of each button on the device's keypad interface.
Describes the general operation mode and button accessibility after powering on the unit.
Step-by-step guide to set the output voltage of the power supply.
Step-by-step guide to set the output current of the power supply.
Details how to turn the power supply output on and off using the dedicated button.
Instructions for saving voltage and current settings for later recall.
Instructions for retrieving previously saved settings from memory.
Details on using the USB port for charging mobile devices and its functionality.
Procedures for calibrating the voltage output accuracy of the power supply.
Procedures for calibrating the current output accuracy of the power supply.
General| Power Rating | 480W |
|---|---|
| Ripple and Noise | ≤ 1mV RMS |
| Model | TP3016M Series |
| Type | Adjustable DC Power Supply |
| Output Voltage | 0-30V |
| Output Current | 0-16A |
| Input Voltage | 110V/220V AC |
| Display | LED |
| Protections | Over Voltage, Over Current, Over Temperature |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 70°C |
| Voltage Resolution | 100mV |
| Current Resolution | 0.01A |
| Cooling | Fan Cooled |
To Next Page
