Tektronix 422 - Page 172

Mechanical Parts List— Type 422 AC-DC
PIG. 2 CHASSIS (cont)
Fig. &
Index
No.
2-53
-54
-55
-56
-57
-58
-59
-60
-61
-62
-63
-64
-65
-66
-67
-68
-69
Q .
Tektronix Serial/Model No. t Description
Part No. ___ Eff __________ Disc ______ y 12345 ______________________
136-0183-00
4
136-0220-00
3
337-0717-00
2
260-0583-01
1
213-0191-00
2
351-0147-00
2
214-1044-00
1
211-0116-00
3
179-0943-01
1
131-0371-00
1
343-0144-00
2
211-0014-00
1
210-0851-00
2
210-0406-00
1
SOCKET, transistor, 3 pin
SOCKET, transistor, 3 pin
SHIELD, horizontal amplifier
SWITCH, slide
mounting hardware: (not included w/switch)
SCREW, thread forming, 5-32 x % inch, PHS
GUIDE, switch actuator
ACTUATOR, switch
mounting hardware: (not included w/assembly)
SCREW, sems, 4-40 x s/u inch, PHB
CABLE HARNESS, horizontal
cable harness includes:
CONNECTOR, single contact, female
CLAMP, loop, 0.125 inch ID
mounting hardware: (not included w/clamp)
SCREW, 4-40 x y2 inch, PHS
WASHER, flat, 0.119 ID x 3/8 inch OD
NUT, hex., 4-40 x 3/ 16 inch
210-0940-00
210-0583-00
3 RESISTOR, variable
mounting hardware for each: (not included w/resistor)
1 WASHER, flat, y4 ID x 3/0 inch OD
1 NUT, hex., V4-3 2 x s/ u inch
124-0147-00
355-0046-00
361-0007-00
337-0719-01
211-0008-00
210-0586-00
386-0117-00
343-0004-00
211-0097-00
210-0851-0C
2 STRIP, ceramic, 7/ u inch, w/13 notches
each strip includes:
2 STUD, plastic
mounting hardware for each: (not included w/strip)
2 SPACER, plastic, 0.188 inch long
1 SHIELD, high-voltage
mounting hardware: (not included w/shield)
3 SCREW, 4-40 x y4 inch, PHS
3 NUT, keps, 4-40 x y4 inch
1 PLATE, rear frame
1 CLAMP, cable, plastic, s/ u inch
mounting hardware: (not included w/clamp)
1 SCREW, 4-40 x 5/u inch, PHS
1 WASHER, flat, 0.119 ID x3/8 inch OD
7-12