Battery Pack— 422 AC-DC
d. Place the battery box over the Battery Pack so that
the cutout in the Battery Pack is directly under the knob,
fuse and input connector holes in the battery box.
e. Start each of the four long screws, removed from the
Battery Pack in step 2b into the four holes indicated, then
tighten the four screws securely.
f. Install the battery box/Battery Pack onto the power
supply, guiding the interconnecting banana jacks onto the
banana plugs of the power supply.
g. Re-install and securely tighten the screw removed in
step lc.
®
5-3
To Next Page
Loading...
