Specification—475
OUTPUT SIGNALS
Geometry
Output Resistance
0.1 division or less of tilt or bowing.
Output resistance of the CH 2 VERT SIGNAL OUT
connector is approximately 50 ohms. Output resistance of
+A and +B GATE outputs is approximately 500 ohms.
Raster Distortion
CATHODE-RAY TUBE
0.1 division or less.
Resolution
Typically at least 15 lines per division horizontally and
Nominal Accelerating Potential
vertically.
Approximately 18,000 volts.
1-6
®
To Next Page
Loading...
