Tektronix AFG3011

To Next Page

To Previous Page

Service safety summary

Only qualiﬁed personnel should perform service procedures. Read this Service

Safety Summary and the General Safety Summary before performing any service

procedures.

Do Not Service Alone. Do not perform internal service or adjustments of this

product unless another person capable of rendering ﬁrst aid and resuscitation is

present.

Disconnec

tPower. To avoid electric shock, disconnect the mains power by means

of the power cord or, if provided, the power switch.

UseCareWhenServicingWithPowerOn. Dangerousvoltagesorcurrentsmay

exist in this product. Disconnect power, remove battery (if applicable), and

disconnect test leads before removing protective panels, soldering, or replacing

compon

ents.

To avoid electric shock, do not touch exposed connections.

AFG3000C and AFG3000 Series Speciﬁcations and Performance Veriﬁcation 1

Main Page

Table of Contents3
General Safety Summary6
Service Safety Summary9
Preface11
Table 1: Supported Products11
Finding Other Information12
Manual Conventions12
Specifications13
Electrical Specifications13
Table 2: Operating Mode13
Table 3: Waveforms14
Table 4: (Category) Specifications14
Table 5: Phase (Except DC, Noise, and Pulse)17
Table 6: Lead Delay (Pulse)17
Table 7: Amplitude17
Table 8: DC Offset18
Table 9: Internal Noise Add19
Table 10: Output Characteristics19
Table 11: Modulation23
Input and Output Specifications26
Table 12: Front Panel26
Table 13: Rear Panel26
General Specifications27
Table 14: Power27
Table 15: Environmental27
Table 16: System Characteristics27
Figure 1: AFG3000 Series Dimensions29
Figure 2: RM3100 Rackmount Dimensions29
Performance Verification31
Self Tests31
Error Codes33
Table 17: Error Codes33
Performance Tests35
Table 18: Performance Test Items35
Test Record37
Table 19: Test Equipment37
Table 20: AFG3000 Series Performance Test Record38
Frequency/Period Test59
Figure 3: Frequency/Period Test59
Amplitude Test60
Figure 4: 50 Ω Terminator Accuracy60
Figure 5: Amplitude Test60
DC Offset Test62
Figure 6: 50 Ω Terminator Accuracy62
Figure 7: DC Offset Tests62
AC Flatness Test64
Figure 8: 50 Ω Terminator Accuracy64
Figure 9: 1 Khz Setup for AC Flatness Test64
Figure 10: >1 Khz Setup for AC Flatness Test65
Harmonics Distortion Test67
Figure 11: Harmonic Distortion Tests67
Total Harmonic Distortion Test70
Figure 12: Total Harmonic Distortion Tests70
Spurious Test72
Figure 13: Spurious Tests72
Rise-Fall Time Test75
Figure 14: Rise-Fall Time Tests75

Table of Contents

Other manuals for Tektronix AFG3011

Related product manuals