Need help?Do you have a question about the Tektronix AFG1022 and is the answer not in the manual?
Provides an overview of the AFG1000 Series generator's capabilities and specifications.
Specifies environmental and power supply conditions for safe instrument operation.
Provides crucial warnings and guidance on connector usage to prevent instrument damage.
Step-by-step instructions for updating the instrument's firmware using a USB memory device.
Guides on modifying parameters like frequency and amplitude for output signals.
Guides on creating, editing, and saving custom waveforms to memory or USB.
Instructions for retrieving saved custom waveforms from internal or USB memory.
Introduces modulation techniques and how to apply them to output signals.
Procedure for performing Amplitude Modulation (AM) on the output signal.
Procedure for performing Frequency Modulation (FM) on the output signal.
Procedure for performing Phase Modulation (PM) on the output signal.
Procedure for generating Pulse Width Modulation (PWM) output, specific to AFG1062.
Instructions for generating Frequency Shift Keying (FSK) modulation.
Procedure for generating Amplitude Shift Keying (ASK) modulation, specific to AFG1062.
To Next Page
General