Tektronix DPO2000 Series - Page 183

Commands Listed in Alphabetical Order
Syntax
HORizontal?
Examples
HORIZONTAL? might return the following horizontal
settings
:HORIZONTAL:DIGITAL:RECOR DLENGTH:MAIN
100.0000E+3;:HORIZONTAL:DI GITAL:SAMPLERATE:MAIN
1.0000E+9;:HORIZONTAL:MAIN :UNITS "s";:HORIZONTAL:PO SITION
50.0000;SAMPLERATE 1.0000E+9;SCALE 4.0000E-6;RECORDLENGTH
100000;DELAY:MODE 1;TIME 0.0E+0
HORizontal:ACQLENGTH? (Query Only)
Returns the record length.
Group
Horizontal
Syntax
HORizontal:ACQLENGTH?
Related Commands
HORizontal:RECOrdlength
Examples
HORIZONTAL:ACQLENGTH? might return HORizontal:ACQLEN GTH?
:HORIZONTAL:ACQLENGTH 1.0000E+6
indicating that the record length is
1 million points.
HORizontal:DELay:MODe
Sets or returns the horizontal delay mode.
Group
Horizontal
Syntax
HORizontal:DELay:MODe {OFF|ON|<NR1> }
HORizontal:DELay:MODe?
Related Commands
HORizontal:POSition
Arguments
OFF sets the Horizontal Delay Mode to off. This causes the HORizontal:POSition
command to horizontally position the waveform.
ON sets the Horizontal Delay Mode to on. This causes the HORizontal:DELay:
TIMe command to horizontally position the waveform.
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-167