Tektronix DPO2000 Series Programmer's Manual

Commands Listed in Alphabetical Order
MATH[1]:HORi
zontal:UNIts
Returns the math waveform horizontal measurement unit value.
Group
Math
Syntax
MATH[1]:HORizontal:UNIts?
Examples
MATH:HORIZONTAL:UNITS? might return MATH :HORIZONTAL:UNIT S "?"
indicating that the math horizontal unit label for unknown values is the default
question mark unit.
MATH[1]:SPECTral:GATing:INDICators
Enables or disables the display of indicators that show the portion of the source
waveform record used to compute the math FFT waveform.
Group
Math
Syntax
MATH[1]:SPECTral:GATing:IN DICators {<NR1>|OFF|ON}
MATH[1]
:SPECTral:GATing:INDICators?
Arguments
OFF
turns off the display of indicators.
ON turns on the display of indicators.
<NR1> = 0 turns off the display of indicators. Any o ther value turns on the display
of indicators.
MATH[1]:SPECTral:GATing:INDICators:END? (Query Only)
Returns the ending point in the source waveform record used for computing the
FFT
Group
Math
Syntax
MATH[1]:SPECTral:GATing:IN DICators:END?
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-181

Tektronix DPO2000 Series Specifications

General

Brand	Tektronix
Model	DPO2000 Series
Category	Test Equipment
Language	English