Commands Listed in Alphabetical Order
THRESHOLD:CH1
0.0E+0;CH2 0.0E+0;CH3 0.0E+0;CH4 0.0E+0; MATH
0.0E+0;REF1 0.0E+0;REF2 0.0E+0;
:SEARCH:SEARCH1:STATE 0
SEARCH:SEAR
CH<x>:COPy (No Query Form)
Copies the search criteria to the trigger, or the trigger criteria to a search. <x>
is the search number.
Group
Search
Syntax
SEARCH:SEARCH<x>:COPy {SEARCHtotrigger |TRIGgertosearc h}
Arguments
SEARCHtotrigger copies the search criteria t o the trigger
TRIGgertosearch copies the trigger criteria to the search
SEARCH:SEARCH<x>:STATE
Sets the search state to on or off. <x> is the search number, which is always 1.
The query form returns the search state.
Group
Search
Syntax
SEARCH:SEARCH<x>:STATE {<NR1>|OFF|ON}
SEARCH:SEARCH<x>:STATE?
Arguments
OFF or <NR1> = 0 sets the search state to off.
ON or <NR1> ≠ 0 sets the search state to on.
SEARCH:SEARCH<x>:TOTAL? (Query Only)
Retu
rnsthetotalnumberofmatchesforthesearch. The total number of matches
may be more than the number of marks placed. <x> is the search number, which
is always 1.
Group
Search
2-244 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
