Tektronix DPO2000 Series - Page 355

Commands Listed in Alphabetical Order
Group
Trigger
Syntax
TRIGger:A{:TRANsition|:RIS EFall}?
Related Commands
TRIGger:A:UPPerthreshold:CH<x> , TRIGger:A:LOWerthreshold:CH<x>
Examples
TRIGGER:A::TRAnsITION? might return
:TRIGGER:A:TRANSITION:POLA RITY POSITIVE;WHEN
SLOWER;DELTATIME 8.0000E-9
TRIGger:A{:TRANsition|:RISEFall}:DELTatime
Sets or returns the delta time used in calculating the transition value for the
transition trigger.
Group
Trigger
Syntax
TRIGger:A{:TRANsition|:RIS EFall}:DELTatime <NR3>
TRIGger:A{:TRANsition|:RIS EFall}:DELTatime?
Arguments
<NR3> specifies the delta time, in seconds.
Examples
TRIGGER:A:TRAnsITION:DELTA TIME 15E-6 sets the delta time of the
transition trigger to 15 µs.
TRIGGER:A:TRAnsITION:DELTA TIME? might return :TRIGGER:A
:TRANSITION:DELTATIME 2.0000E-09
indicating that the delta time of the
transition trigger is set to 2 n s.
TRIGger:A{:TRANsition|:RISEFall}:POLarity
Sets or returns the polarity for the transition trigger.
Group
Trigger
Syntax
TRIGger:A{:TRANsition|:RIS EFall}:POLarity
{EITher|NEGative|POSitive}
TRIGger:A{:TRANsition|:RIS EFall}:POLarity?
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-339