Tektronix DPO2012B Programmer's Manual

Commands Listed in Alphabetical Order
Syntax
BUS:B<x>:RS23
2C:POLarity {NORMal|INVERTed}
BUS:B<x>:RS232C:POLarity?
Arguments
NORMal sets the RS232C bus polarity to positive.
INVERTed sets the RS232C bus polarity to negative.
BUS:B<x>:RS232C:RX:SOUrce
Sets or returns the RS232 RX source for bus <x>, where x is the bus number.
Conditions
This command requires a DPO2COMP application module.
Group
Bus
Syntax
BUS:B<x>:RS232C:RX:SOUrce {CH1|CH2|CH3 |CH4|
D0|D1|D2|D3|D4|D5|D6|D7|D8 |D9|D10|D11|D12|D13|D14|D15}
BUS:B<x>:RS232C:RX:SOUrce?
Arguments
CH1–CH4 specifies the channel to use for the RS232 RX source.
D0–D15 specifies the digital channel to use for the RS232 RX source.
BUS:B<x>:RS232C:TX:SOUrce
Sets or returns the RS232 TX Source for bus <x>, where x is the bus number.
Conditions
This command requires a DPO2COMP application module.
Group
Bus
Syntax
BUS:B<x>:RS232C:TX:SOUrce {CH1|CH2|CH3 |CH4|
D0|D1|D2|D3|D4|D5|D6|D7|D8 |D9|D10|D11|D12|D13|D14|D15}
BUS:B<x>:RS232C:TX:SOUrce?
Arguments
CH1–CH4 specifies the channel to use as the RS232 TX source.
D0–D15 specifies the digital channel to use as the RS232 TX source.
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-85

Tektronix DPO2012B Specifications

General

Brand	Tektronix
Model	DPO2012B
Category	Test Equipment
Language	English