To Next Page

To Previous Page

Commands Listed in Alphabetical Order

Group

Waveform Trans

fer

Syntax

DATa:SOUrce {CH1|CH2|CH3|CH4|MATH|REF1 |REF2|

D0|D1|D2|D3|D4|D5|D6|D7|D 8|D9|D10|D11|D12|D13|D14|D15}

DATa:SOUrce?

Related Commands

CURVe

Arguments

CH1–CH4 speciﬁes which analog channel data will be transferred from the

oscilloscope to the contro ller, channels 1 through 4.

MATH speciﬁes that the Math w aveform data will be transferred from the

oscilloscope to the controller.

REF1–REF2 speciﬁes which Reference waveform data will be transferred from

the oscilloscope to the controller, waveforms, 1 through 4.

D0–D15 speciﬁes that the returned waveform data is packaged as 4 bytes per

sample, representing the states of all digital channels (D0–D15) and the logic

states of the analog channels (Ch1–Ch4). When the

:DATA:SOURCE is set to

DIGITAL, the

:DATA:WIDTH is automatically set to 4.

The format of the returned 4- byte (32 bit) data is as follows:

2-130 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix DPO2012B Programmer's Manual

Other manuals for Tektronix DPO2012B