Tektronix DPO2012B Programmer's Manual

Commands Listed in Alphabetical Order
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:I2C:DATa:SIZe <NR1>
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:I2C:DATa:SIZe?
Arguments
<NR1> is the data string length in bytes.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:VALue
Sets or returns the binary data string to be used for an I2C trigger search if the
search condition is DATA or ADDRANDDATA.
SEARCH<x> is the search
number and
B<x> is the bus number.
Conditions
This command requires a DPO2EMBD application module.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:I2C:DATa:VALue <bin>
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:I2C:DATa:VALue?
Arguments
<bin> is the data in binary format.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:CONDition
Sets or returns the search condition for a LIN search.
Conditions
This command requires a DPO2AUTO application m odule.
Group
Bus
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:LIN:CONDition
{SYNCField|IDentifier|DAT A|IDANDDATA|WAKEup|SLEEP|ERROR}
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:LIN:CONDition?
Arguments
SYNCField specifies to s earch on the sync field.
IDentifier specifies to search on the identifier.
DATA specifies to search on the data.
2-254 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix DPO2012B Specifications

General

Brand	Tektronix
Model	DPO2012B
Category	Test Equipment
Language	English