Tektronix DPO2012B Programmer's Manual

Commands Listed in Alphabetical Order
Examples
SEARCH:SEARCH
1:TRIGGER:A:BUS:B1:LIN:ERRTY PE?
might return
SEARCH:SEARCH1:TRIGGER:A: BUS:B1:LIN:ERRTYPE SYNC indicating a
SYNC error type.
SEARCH:SEAR
CH<x>:TRIGger:A:BUS:B<x>:LIN:IDentifier:VALue
Sets or returns the binary address string used for LIN search if search condition is
ID or IDANDDATA.
Conditions
This command requires a DPO2AUTO application m odule.
Group
Bus
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:LIN:IDentifier:VALue
<QString>
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:LIN:IDentifier:VALue?
Arguments
<QString> is a quoted string specifying the binary address string to be used for
LIN search if search condition is ID or IDANDDATA.
Examples
SEARCH:SEARCH1:TRIGGER:A: BUS:B1:LIN:IDENTIFIER:VALUE? might
return
SEARCH:SEARCH1:TRIGGER:A:BUS :B1:LIN:IDENTIFIER:VALUE
"XXXXXX"
indicating that the binary address is undefined.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:PARallel:VALue
Sets or returns the binary data string to be used for a parallel trigger search.
SEARCH<x> is the search number and B<x> is the bus number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:PARallel:VALue <QString>
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:PARallel:VALue?
Arguments
<QString> is the binary data string.
2-258 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix DPO2012B Specifications

General

Brand	Tektronix
Model	DPO2012B
Category	Test Equipment
Language	English