Tektronix DPO2012B Programmer's Manual

Commands Listed in Alphabetical Order
SEARCH:SEARC
H<x>:TRIGger:A:BUS:B<x>:SPI:DATa{:MOSI|:O UT}:VALue
Sets or returns the binary data string for an SPI trigger search if search the
condition is MOSI, or MISOMOSI.
SEARCH<x> is the search number and B<x>
is the bus num
ber.
Conditions
This command requires a DPO2EMBD application module.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:SPI:DATa{:MOSI|:OUT}:
VALue < bin>
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:SPI:DATa{:MOSI|:OUT}:
VALue?
Arguments
<bin> is the data in binary format.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:SIZe
Sets or returns the length of the data string for an SPI trigger search if the search
condition is MISO, MOSI, or MISOMOSI.
SEARCH<x> is the search number
and
B<x> is the bus number.
Conditions
This command requires a DPO2EMBD application module.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:SPI:DATa:SIZe <NR1>
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:SPI:DATa:SIZe?
Arguments
<NR1> is the data string length in bytes.
SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce
Sets or returns a bus serial search. <x> is the search number.
Conditions
This command requires a DPO2AUTO or DPO2EMBD application module.
2-262 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix DPO2012B Specifications

General

Brand	Tektronix
Model	DPO2012B
Category	Test Equipment
Language	English