Tektronix DPO2012B Programmer's Manual

Commands Listed in Alphabetical Order
Group
Trigger
Syntax
TRIGger:A:VIDeo?
Examples
TRIGGER:A:VIDEO? might return :TRIGGER:A:VIDEO:POLARITY
POSITIVE;SOURCE CH1;STANDARD NTSC;SYNC
ALLLINES;H
OLDOFF:FIELD 0.0000;:TRIGGER:A:VIDEO:CUST OM:FORMAT
PROGRESSIVE;SCANRATE15K;:T RIGGER: A:VIDEO:LINE 1;HDTV:FORMAT
HD1080I60
TRIGger:A:VIDeo:HOLDoff:FIELD
Sets or returns the video trigger holdoff in terms of video fields.
Group
Trigger
Syntax
TRIGger:A:VIDeo:HOLDoff:FI ELD <NR3>
TRIGger:A:VIDeo:HOLDoff:FI ELD?
Arguments
<NR3> argument is a real number from 0.0 to 8.5 in in
crements of 0.5. The
argument sets the number of fields that the oscilloscope waits before rearming
the video trigger.
Examples
TRIGGER:A:VIDEO:HOLDOFF:FI ELD? might return
:TRIGGER:A:VIDEO:HOLDOFF:F IELD 5 indicating that the oscilloscope is set
to wait 5 video fields before rearming the trigger.
TRIGGER:A:VIDEO:HOLDOFF:FI ELD 4.5 sets the oscilloscope to wait 4.5 video
fields before rearming the trigger.
TRIGger:A:VIDeo:LINE
Sets or returns the video line number on which the oscilloscope triggers. Use the
TRIGger:A:VIDeo{:SYNC|:FIELD} command to actually trigger the oscilloscope
on the line that you specify with this command.
Group
Trigger
Syntax
TRIGger:A:VIDeo:LINE <NR1>
TRIGger:A:VIDeo:LINE?
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-343

Tektronix DPO2012B Specifications

General

Brand	Tektronix
Model	DPO2012B
Category	Test Equipment
Language	English