Commands Listed in Alphabetical Order
*IDN? (Query O
nly)
Returns the oscilloscope identification code.
Group
Miscellaneous
Syntax
*IDN?
Related Commands
ID?
Examples
*IDN? might return :T EKTRONIX,DPO202 4,SN123456789,CF:91.1CT
FV:v1.00000
indicating that the oscilloscope model number, serial number,
configured number, and firmware version number.
LANGuage
Sets or re
turns the user interface display language. This command only affects
the oscilloscope displayed language. Remote commands and their responses
are always in English.
Group
Miscellaneous
Syntax
LANGuage
{ENGLish|FRENch|GERMan|IT ALian|SPANish|PORTUguese|JAPAnese|
KOREan|RUSSian|SIMPlified chinese|TRADitionalchinese}
LANGuage?
Examples
LANGUAGE? might return :LANGUAGE ENGLISH.
LOCk
Enables or disables all front-panel buttons and knobs. There is no front panel
equivalent.
When the front panel is locked, neither theFPAnel:PRESS nor the FPAnel:TURN
commands will work. They will not generate an error event either. You can work
around this by using the appropriate programmatic interface commands, instead of
the front-panel commands. For example, to set the trigger level to 50%, you could
use TRIGger:A SETLevel. To force a trigger, you could use TRIGger FORCe.
2-172 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
