Tektronix DPO2024 Programmer's Manual

Commands Listed in Alphabetical Order
MARK:SELecte
d:SOURCE? (Query Only)
Returns the source waveform for the selected mark.
Group
Mark
Syntax
MARK:SELected:SOURCE?
MARK:SELected:STARt? (Query Only)
Returns the starting point of the selected mark, 0 to 100% of the waveform.
Group
Mark
Syntax
MARK:SELected:STARt?
MARK:SELected:STATe? (Query Only)
Returns the on or off state of the selected mark. The selected mark is at or near
the center of the screen. If you pres s the front-panel Set/Clear button, this mark
will disappear.
Group
Mark
Syntax
MARK:SELected:STATe?
MARK:SELected:ZOOm:POSition? (Query Only)
Returns the position of the selected mark, 0 to 100% of the zoom overview
window.
Group
Mark
Syntax
MARK:SELected:ZOOm:POSitio n?
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-177

Tektronix DPO2024 Specifications

General

Brand	Tektronix
Model	DPO2024
Category	Test Equipment
Language	English