Tektronix DPO2024B Programmer's Manual

Commands Listed in Alphabetical Order
Conditions
This command re
quires a DPO2AUTO application module.
Group
Bus
Syntax
TRIGger:A:BUS:B<x>:LIN:DAT a:VALue <QString>
TRIGger:A:BUS:B<x>:LIN:DAT a:VALue?
Arguments
<QString> is a quoted string that is the LIN trigger data value.
Examples
TRIGGER:A:BUS:B1:LIN:DATA: VALUE “11001101”sets the data value to
11001101.
TRIGGER:A:BUS:B1:LIN:DATA: VALUE? might return
TRIGGER:A:BUS:B1:LIN:DATA: VALUE "XXXXXXXX" indicating
that the data value is don't care.
TRIGger:A:BUS:B<x>:LIN:ERRTYPE
Sets or returns the error type be used for LIN trigger.
Conditions
This command requires a DPO2AUTO applic ation module.
Group
Bus
Syntax
TRIGger:A:BUS:B<x>:LIN:ERR TYPE {SYNC|PARity|CHecksu m}
TRIGger:A:BUS:B<x>:LIN:ERR TYPE?
Arguments
SYNC sets the LIN error type to SYNC.
PARity sets the LIN error type to parity.
CHecksum se ts the LIN error type to checksum.
Examples
TRIGGER:A:BUS:B1:LIN:ERRTY PE CHECKSUM sets the LIN error type to
checksum.
TRIGGER:A:BUS:B1:LIN:ERRTY PE? might return
TRIGGER:A:BUS:B1:LIN:ERRTY PE SYNC indicating that the LIN error type
is SYNC.
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-307

Tektronix DPO2024B Specifications

General

Brand	Tektronix
Model	DPO2024B
Category	Test Equipment
Language	English