Tektronix DPO2024B Programmer's Manual

Commands Listed in Alphabetical Order
Examples
TRIGGER:A:PUL
SEWIDTH:WHEN LESST HAN
specifies that the duration of the A
pulse will fall within defined high and low limits.
TRIGGER:A:PU
LSEWIDTH:WHEN?
might return :TRIGGER:A:PULSEWIDTH:
WHEN TH AN
indicating that the conditions for generating a width trigger.
TRIGger:A:PULSEWidth:WIDth
Sets or returns the width setting for the pulse width trigger.
Group
Trigger
Syntax
TRIGger:A:PULSEWidth:WIDt h <NR3>
TRIGger:A:PULSEWidth:WIDt h?
Related Commands
TRIGger:A:PULSEWidth:WHEn
Arguments
<NR3> specifies the pulse width in seconds.
Examples
TRIGGER:A:PULSEWIDTH:WIDT H 5.0E-6 sets the pulse width to 5 µs.
TRIGGER:A:PULSEWIDTH:WIDT H? might return :TRIGGER:A:PULSEWIDTH:
WIDTH 2 .0000E-9
indicating that the pulse width is set to 2 ns.
TRIGger:A:RUNT? (Query Only)
Returns the current A runt trigger parameters.
Group
Trigger
Syntax
TRIGger:A:RUNT?
Examples
TRIGGER:A:RUNT? might return :TRIGGER:A:RUNT:SOURCE CH1;POLARIT Y
POSITIVE;WHEN OCCURS;WIDTH 4.0000E-9
.
TRIGger:A:RUNT:POLarity
Sets or returns the polarity for the runt trigger.
2-330 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix DPO2024B Specifications

General

Brand	Tektronix
Model	DPO2024B
Category	Test Equipment
Language	English