Tektronix DPO2024B Programmer's Manual

Commands Listed in Alphabetical Order
Arguments
OFF turns alias
expansion off. If a defined alias is sent when ALIas is off, a
command error (110) will be generated.
ON turns alias
expansion on. When a definedaliasisreceived,thespecified
command sequence is substituted for the alias and executed.
<NR1> =0dis
ables alias mode; any other value enables alias mode.
Examples
ALIAS ON turns the alias feature on. When a defined alias is received, the specified
command sequence is substituted for the alias and executed.
ALIAS? might return :ALIAS 1 indicating that the alias feature is on.
ALIas:CATalog? (Query Only)
Returns a list of the currently definedaliaslabels,separatedbycommas. Ifno
aliases are defined, the query returns the string "".
Group
Alias
Syntax
ALIas:CATalog?
Examples
ALIAS:CATALOG? might return the string :ALIAS:CATALOG
"SETUP1","TESTMENU1","DEF AULT"
showing that there are three aliases
named SETUP1, TESTMENU1, and DEFAULT.
ALIas:DEFine
Assigns a sequence of program messages to an alias l abel. These messages are
then substituted for the alias whenever it is received as a command or query,
provided that ALIas:STATE has been turned on. The query form of this command
returns the definitions of a selected alias.
NOTE. Attempting to give two aliases the same name causes an error. To give a
new alias the name of an existing alias, the existing alias must first be deleted.
Group
Alias
Syntax
ALIas:DEFine <QString><,>{<QString>|<B lock>}
ALIas:DEFine? <QString>
2-64 MSO2000B, DPO2000B, MSO2000 and DPO2000 Series O scilloscopes Programmer Manual

Tektronix DPO2024B Specifications

General

Brand	Tektronix
Model	DPO2024B
Category	Test Equipment
Language	English