Tektronix KEITHLEY 2200 Series - Trigger Commands

Command Groups
Trigger Comma
nds
Trigger commands are used to determine the timing of list mode sequences.
Table 2-10: Trigger commands
Header Description
TRIGger[:IMMediate]
Forces an immediate trigger event.
*TRG Generates a trigger event.
[SOURce:]VOLTage:TRIGgered[:IMMediate] Set or query the trigger voltage.
[SOURce:]CURRent:TRIGgered[:IMMediate] Set or query the trigger current.
INSTrument:COUPle[:TRIGger] Set or query the channel that will respond the trigger command.
2-10 Series 2200 Programmable Multichannel DC Power Supplies Programmer Manual