Tektronix KEITHLEY 2200 Series User Manual

Commands Listed in Alphabetical Order
Examples
OUTPUT:PON RST
OUTPUT:PON? might return RCL0, which would indicate that the instrument will
return to the present output state if the power is cycled.
[SOURce:]OUTPut:SERies
This command sets the serial sta t e of CH1 and CH2.
Group
Source
Syntax
[SOURce:]OUTPut:SERies {0 |1|OFF|ON}
[SOURce:]OUTPut:SERies?
Arguments
0 or OFF sets the parallel state to off.
1 or ON sets the parallel state to on.
Examples
[SOURCE:]OUTPUT:SERIES
[SOURce:]OUTPut[:STATe][:ALL]
This command turns all of the enabled output channels on or off.
Group
Source
Syntax
[SOURce:]OUTPut[:STATe][:ALL] {0|1|ON|OFF}
[SOURce:]OUTPut[:STATe][:ALL]?
Related Commands
[SOURce:]OUTPut:TIMer[:STATe]
Arguments
0 or OFF turns the power supply output off.
1 or ON turns the power supply output on.
Returns
1|0
Examples
OUTPUT ON
OUTPUT? might return 0, which would indicate that the outputs are off.
2-30 Series 2200 Programmable Multichannel DC Power Supplies Programmer Manual

Tektronix KEITHLEY 2200 Series Specifications

General

Brand	Tektronix
Model	KEITHLEY 2200 Series
Category	Power Supply
Language	English