Appendix B: Programming Examples
Example 6
This example sh
ows a command sequence to couple all outputs with voltage
and current triggered levels.
Talker Listen
er Script 1: use the INSTrument:COUPle command
to coup le all outpu t with volta ge and curre nt triggered
levels.
SYSTem:REMote
*IDN?
*RST
OUTPut 1
INSTrument:NSELect 1
VOLTage:TRIGgered 6
CURRent:TRIGgered 0.2
INSTru
ment:NSELect 2
VOLTage:TRIGgered 10
CURRent:TRIGgered 0.5
INSTrument:NSELect 3
VOLTage:TRIGgered 1
CURRent:TRIGgered 0.1
INS
Trument:COUPle CH1, CH 2, CH3
*TRG
B-14 Series 2000 Programmalable Multichannel lDC Power Supplies P rogrammer
To Next Page
Loading...
