Tektronix MSO2012B Programmer's Manual

Commands Listed in Alphabetical Order
DIAg:RESUlt:
FLAg? (Query Only)
Returns the pass/fail status from the last self-test sequence exec ution. U se this
query to determine which test(s) has failed.
Group
Calibration and Diagnostic
Syntax
DIAg:RESUlt:FLAg?
Related Commands
DIAg:RESUlt:LOG?
Returns
PASS indicates that all of the selected self (diagnostic) tests have passed.
FAIL indicates that at leas t one of the selected self (diagnostic) tests has failed.
Examples
DIAG:RESULT:FLAG? returns either DIAG:RESULT:FLAG PASS or FAIL.
DIAg:RESUlt:LOG? (Query Only)
Returns the internal results log from
the last self-test sequence execution. The
list contains all modules and module interfaces that were tested along with the
pass/fail status of each.
Group
Calibration and Diagnostic
Syntax
DIAg:RESUlt:LOG?
Related Commands
DIAg:RESUlt:FLAg?
R
eturns
<QString> in the following format:
<Status>--<Module name>[,<Status>-- <Module name>...]
Examples
DIAG:RESULT:LOG? might return :DIAG:RESULT:LOG "NOT RUN --CPU,NOT
RUN--DISPLAY,NOT RUN--FPANEL,NOT RUN--IO,NOT RUN--ACQ,NOT
RUN--RO M,NOT RUN-- APPKEY"
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-137

Tektronix MSO2012B Specifications

General

Brand	Tektronix
Model	MSO2012B
Category	Test Equipment
Language	English