Tektronix MSO2014 Programmer's Manual

Commands Listed in Alphabetical Order
Syntax
CURSor:MODe {T
RACk|INDependent}
CURSor:MODe?
Arguments
TRACk ties the navigational functionality of the two cursors together. For cursor 1
adjustments, this ties the movement of the two cursors together; however, cursor 2
continues to move independently of cursor 1.
INDependent allows independent adjustment of the two cursors.
Examples
CURSOR:MODE TRACK specifies that the cursor positi
ons move in unison.
CURSOR:MODE? might return :CURSOR:MODE TRACK indicating that the two
cursors move in unison.
CURSor:VBArs? (Query Only)
Returns the current settings for the vertical
bar cursors.
Group
Cursor
Syntax
CURSor:VBArs?
Examples
CURSOR:VBARS? might return the following vertical bar settings
:CURSOR:VBARS:UNITS SECONDS;POSITIO N1 1.0000E-06;POSITION2
9.0000E-06
CURSor:VBArs:ALTERNATE<x>? (Query Only)
Returns t
he alternate readout for the waveform (Vbar) cursors specified by <x>.
This alternate readout is in effect for a bus waveform.
Group
Cursor
Syntax
CURSor:VBArs:ALTERNATE<x>?
Arguments
X=1specifies vertical bar cursor 1.
X=2specifies vertical bar cursor 2.
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-115

Tektronix MSO2014 Specifications

General

Brand	Tektronix
Model	MSO2014
Category	Test Equipment
Language	English