Commands Listed in Alphabetical Order
Related Commands
*WAI, *CLS
Arguments
START sends a block of data representing the current screen image to the requested
port. The data sent is in the image format specified by SAVe:IMAGe:FILEFormat,
and the compression level is controlled by whatever format h as been selected
(BMP and TIFF are uncompre ssed, while PNG is compre ssed).
Examples
HARDCOPY initiates a screen c
opy to the active printer.
HARDCopy:INKSaver
Changes hard copy output to print traces and graticule on a white background
while retaining waveform c
olor information (except for channel 1, which prints as
dark blue because yellow does not show up well and is difficult to see on a white
background). This option can significantly reduce print time and quantities of ink
required compared with WYSIWYG dark background images.
Group
Hard Copy
Syntax
HARDCopy:INKSaver?
Arguments
ON or <NR1> ≠ 0 sets the ink s aver mode on.
OFF or <NR1> = 0 sets the ink saver mode off.
Examples
HARDCOPY:INKSAVER ON will cause subsequent hard copy output to display the
screen on a white background.
HARDCopy:PREVIEW (No Query Form)
Displays a preview of the current screen contents with the InkSaver palette
applied.
Group
Hard Copy
Syntax
HARDCopy:PREVIEW {ON|OFF|<NR1>}
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-165
To Next Page
Loading...
Need help?
General
