To Next Page

To Previous Page

Commands Listed in Alphabetical Order

Examples

MATH1:DEFINE "

CH1+CH2"

adds the Ch 1 waveform and Ch 2 waveform,

storing the results in Math 1.

MATH:DEFINE?

might return :MATH1: DEFINE "CH2*REF2" as the expression

that deﬁnes Math 1.

MATH[1]:HORizontal:POSition

Sets or returns the math horizontal display position for FFT or (non-live), live

math reference waveforms.

Group

Math

Syntax

MATH[1]:HORizontal:POSiti on <NR

MATH[1]:HORizontal:POSiti on?

Arguments

<NR3> is the % of the math waveform that precedes center screen. It can vary

from 0.0 to 100.0.

Examples

MATH:HORIZONTAL:POSITION 10 sets the horizontal position to 10% pretrigger

MATH[1]:HORizontal:SCAle

Sets or returns the math horizontal display scale for FFT or (non-live), live math

waveforms. The horizontal scale of a dual math waveform w ith a channel source

waveform is set through the HORizontal:SCAle command.

Group

Math

Syntax

MATH[1]:HORizontal:SCAle <NR3>

MATH[1]:HORizontal:SCAle?

Arguments

<NR3> is the math horizontal scale in seconds.

Examples

MATH:HORIZONTAL:SCALE? might return MATH:HORIZONTAL:SC ALE 2.0E-4

indicating that the math horizontal scale is 200 μ

2-180 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix MSO2014 Programmer's Manual

Other manuals for Tektronix MSO2014