Tektronix MSO2014 Programmer's Manual

Commands Listed in Alphabetical Order
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:SOUrce {B1|B2}
SEARCH:SEARCH<x>:TRIGger:A :BUS:SOUrce?
Arguments
B1 specifies the Bus 1 source.
B2 specifies the Bus 2 source.
SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe
Sets or returns the slope for an edge trigger search to determine where to place a
mark. <x> is the search number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A :EDGE:SLOpe {RISe|FALL}
SEARCH:SEARCH<x>:TRIGger:A :EDGE:SLOpe?
Arguments
RISe specifies a rising edge.
FALL specifies a falling edge.
SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce
Sets or returns the source waveform for an edge trigger search to determine where
to place a mark. <x> is the search number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A :EDGE:SOUrce
{CH1|CH2|CH3|CH4|MATH}
SEARCH:SEARCH<x>:TRIGger:A :EDGE:SOUrce?
Arguments
CH<x> specifies one input channel as the edge source, where <x> is the channel
number.
MATH specifies the math waveform as the search source.
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-263

Tektronix MSO2014 Specifications

General

Brand	Tektronix
Model	MSO2014
Category	Test Equipment
Language	English