Tektronix MSO2014 Programmer's Manual

Commands Listed in Alphabetical Order
Arguments
EIther specifie
s either rising or falling edge as the clock edge.
RISing specifies the rising edge as the clock edge.
FALling specifies the falling edge as the clock edge.
BUS:B<x>:PARallel:CLOCK:ISCLOCKed
Sets or retu
rns the parallel bus clock function for bus <x>, where x is the bus
number.
Group
Bus
Syntax
BUS:B<x>:PARallel:CLOCK:IS CLOCKed {YES|NO}
BUS:B<x>:PARallel:CLOCK:IS CLOCKed?
Arguments
YES specifies that the parallel bus is clocked.
NO specifies that the parallel bus is not clocked.
BUS:B<x>:PARallel:CLOCK:SOUrce
Sets or returns the parallel bus source <x>, where x is the bus number.
Group
Bus
Syntax
BUS:B<x>:PARallel:CLOCK:SO Urce {CH1|CH2|CH3|CH4|
D0|D1|D2|D3|D4|D5|D6|D7|D8 |D9|D10|D11|D12|D13|D14|D15}
BUS:B<x>:PARallel:CLOCK:SO Urce?
Arguments
CH1–CH4 specifies the channel to use as the parallel bit source.
D0–D15 specifies the digital channel to use as the parallel bit source.
BUS:B<x>:PARallel:WIDth
Sets or returns the number of bits used for the width of the parallel bus <x>,
where x is the bus number.
Group
Bus
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-81

Tektronix MSO2014 Specifications

General

Brand	Tektronix
Model	MSO2014
Category	Test Equipment
Language	English