Commands Listed in Alphabetical Order
Group
Alias
Syntax
ALIas:DELEte:ALL
Related Commands
ALIas:DELEte, ALIas:DELEte[:NAMe]
Examples
ALIAS:DELETE:ALL deletes all existing aliases.
ALIas:DELEte[:NAMe] (No Query Form)
Removesaspecified alias. This command is identical to ALIas:DELEte
Group
Alias
Syntax
ALIas:DELEte[:NAMe] <QString>
Arguments
<QString> is the name of the alias to remove. Using ALIas:DELEte[:NAMe]
without specifying an alias causes an execution error. <QString> must be an
existing alias.
Examples
ALIAS:DELETE[:NAME] “STARTUP” deletes the alias named STARTUP.
ALIas[:STATE]
Turns aliases on or off. This command is identical to the ALIas command.
Group
Alias
Syntax
ALIas[:STATE] {<NR1>|OFF|ON}
ALIas[:STATE]?
Arguments
OFF or <NR1> = 0 turns alias expansion off. If a defined alias is sent when
ALIas:STATE is OFF, a command error (102) is generated.
ON or <NR1>0 turns alias expansion on. When a defined alias is received, the
specified command sequence is substituted for the alias and executed.
2-66 MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
