Getting Started with the MSO/DPO2000 , M SO/DPO30 00, and MSO/DPO4000 Series Oscilloscopes
3. On the MS O /DP O 4000, push the Set to
50% button. This auto m atically sets t he
trigger level to the midpoint of the signal
for a stable trigger.
On the MSO/DPO20 00 and
MSO/DPO3000, push the Level
knob. This will set the trigger level to the
midpoint.
Demo 2 Board Instruction Manua l 11
To Next Page
Loading...
