Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–165
LOCk
Enables and disables all front panel buttons and knobs. There is no front-panel
equivalent.
Miscellaneous
UNLock, Remote Enable Group, Local Lockout Group
disables all front panel controls.
enables all front panel controls. This is equivalent to the UNLock ALL
command.
NOTE. If the digitizing oscilloscope is in the Remote With Lockout State (RWLS),
the LOCk NONe command has no effect. For more information see the ANSI-
IEEE Std. 488.1-1987 Standard Digital Interface for Programmable Instrumen-
tation, section 2.8.3 on RL State Descriptions.
locks the front panel controls.
returns when the front panel controls are enabled by this command.
*LRN? (Query Only)
Returns a string listing the digitizing oscilloscope settings, except for configura-
tion information for the calibration values. You can use this string to return the
digitizing oscilloscope to the state it was in when you made the *LRN? query.
Group
Related Commands
Syntax
Arguments
Examples
To Next Page
Loading...
Need help?
General
