Need help?Do you have a question about the Tektronix TDS 754D and is the answer not in the manual?
General| Bandwidth | 500 MHz |
|---|---|
| Channels | 4 |
| Vertical Sensitivity | 1 mV/div to 10 V/div |
| Vertical Resolution | 8 bits |
| Maximum Input Voltage | 400 V (DC + peak AC) |
| Operating Temperature | 0°C to +50°C |
| Input Impedance | 1 MΩ || 13 pF |
| Trigger Modes | Edge, Pulse Width, Logic |
| Storage Temperature | -20°C to +60°C |
| Power Requirements | 45 to 440 Hz |
| Weight | 9.5 kg (21 lbs) |
| Dimensions | 425 mm × 177 mm × 425 mm (16.7 in × 7 in × 16.7 in) |
Essential safety measures to prevent fire hazards and personal injury.
Overview of the Tektronix TDS Oscilloscope features and capabilities.
Instructions for initial installation, preparation, and powering on the oscilloscope.
Principles and methods for achieving stable waveform displays using triggers.
Techniques for taking automated, cursor, graticule, and histogram measurements.
To Next Page
