Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–145
HORizontal:DELay:TIMe <NR3>
:
DELay
:
HORizontal
TIMe <NR3><Space>
<NR3> is the time, in seconds, between the main trigger and the delayed trigger.
The range on the TDS 5XXA, 6XXA, & 7XXA is from 16 ns to 250 seconds
with a resolution of 4 ns. The range on the TDS 4XXA is from 10 ns to 20
seconds with a resolution of 10 ns.
HORIZONTAL:DELAY:TIME 2.0E-3
sets the delay time between the main and delayed time base to 2 ms.
HORizontal:DELay:TIMe? (Query Only)
Returns the delay time parameters.
Horizontal
HORizontal:DELay:TIMe:RUNSAfter?, HORizontal:DELay:TIMe:TRIGAfter?
HORizontal:DELay:TIMe?
:
DELay
:
HORizontal
TIMe
?
HORIZONTAL:DELAY:TIME?
might return :HORIZONTAL:DELAY:TIME:16.0E-9 for the delay time.
HORizontal:DELay:TIMe:RUNSAfter
Sets or queries the delay time to wait after the main trigger before the delayed
time base begins. This is equivalent to setting Delayed Runs After Main in the
Time Base side menu of the Horizontal menu.
Horizontal
HORizontal:DELay:MODe
HORizontal:DELay:TIMe:RUNSAfter <NR3>
Syntax
Arguments
Examples
Group
Related Commands
Syntax
Examples
Group
Related Commands
Syntax
To Next Page
Loading...
Need help?
General
