Tektronix TDS 684A - Page 299

Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–281
Trigger
TRIGger:MAIn:VIDeo:SCANPeriod <NR3>
TRIGger:MAIn:VIDeo:SCANPeriod?
TRIGger:MAIn:VIDeo:SOUrce
Option 05 Only
Sets or queries the source for the main video trigger. This is equivalent to
selecting the Source in the video main menu and a desired channel from the side
menu.
Trigger
TRIGger:MAIn:VIDeo:SOUrce CH<x>
TRIGger:MAIn:VIDeo:SOUrce?
<Space>
?
TRIGger :
:
CH
VIDeo
MAIn
SOUrce
:
<x>
CH<x> specifies one of the input channels (CH1, CH2, CH3, or CH4; or CH1,
CH2, AUX1, or AUX2 on the TDS 520A, 524A, & 620A).
TRIGGER:MAIN:VIDEO:SOURCE CH1
selects channel 1 as the source for the main video trigger.
TRIGger:MAIn:VIDeo:STANdard
TDS 5XXA, 6XXA, & 7XXA Option 5 Only
Sets or queries the video trigger standard. This is equivalent to selecting the
standard in the video Standard pop-up (525/NTSC, 625/PAL, HDTV, or
FlexFmt).
Trigger
Group
Syntax
Group
Syntax
Arguments
Examples
Group