Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–287
VERBose
Sets and queries the Verbose State that controls the length of keywords on query
responses. Keywords can be both headers and arguments. This command does
not affect IEEE Std 488.2-1987 Common Commands (those starting with an
asterisk).
Miscellaneous
HEADer, *LRN?, SET?
or 0 sets the Verbose State true, which returns full-length keywords
for applicable setting queries.
or = 0 sets the Verbose State false, which returns minimum-length
keywords for applicable setting queries.
sets the Verbose State true.
might return the value , showing that the Verbose State is true.
*WAI (No Query Form)
(Wait) Prevents the digitizing oscilloscope from executing further commands or
queries until all pending operations finish. This command allows you to
synchronize the operation of the digitizing oscilloscope with your application
program. Synchronization methods are described on page 3–7.
Status and Error
Group
Related Commands
Syntax
Arguments
Examples
Group
To Next Page
Loading...
Need help?
General
