Command Descriptions
2–76
TDS Family Oscilloscope Programmer Manual
CURSor:PAIred:HPOS2 (Query Only)
Queries the horizontal bar (voltage) position of the second paired cursor.
Cursor
CURSor:FUNCtion
CURSor:PAIred:HPOS2?
CURSor
:
PAIred :
?
HPOS2
CURSOR:PAIRED:HPOS2?
might return -64.0E-3, indicating the second cursor is at –64.0 mV.
CURSor:PAIred:POSITION<x>
Sets or queries the vertical bar (time) position of the first or second paired cursor.
x is either 1 or 2 and refers to the first or second cursor.
The CURSor:VBArs:UNits command specifies the units for these cursors.
Cursor
CURSor:FUNCtion, CURSor:VBArs:UNits
CURSor:PAIred:POSITION2 <NR3>
CURSor:PAIred:POSITION2?
CURSor
:
PAIred :
?
<Space> <NR3>
POSITION <x>
<NR3> specifies the cursor position in the units specified by the
CURSor:VBArs:UNits command.
The position can appear in units of seconds, 1/seconds (hertz), or video line
numbers (with option 05). On the TDS 4XXA, position can also appear in units
of clocks or 1/clocks.
Group
Related Commands
Syntax
Examples
Group
Related Commands
Syntax
Arguments
To Next Page
Loading...
Need help?
General
