Performance Tests
TDS 500B, TDS 600B & TDS 700A Performance Verification and Specifications
1–77
PAL Signal
Source
Digitizing Oscilloscope
75 W Cable
75 W
Terminator
Output
Figure 1–35: Line Count Accuracy Test Hookup
H Press the main-menu Trigger Position.
H Press the side-menu to Set to 50%.
H Press the main-menu to Horiz Pos.
H Press the side-menu to Set to 50%.
H Use the HORIZONTAL POSITION knob to move the falling edge
of the sync pulse to two divisions to the left of center screen. See
Figure 1–36.
To Next Page
Loading...
