Tektronix TDS 784D User Manual

Index
TDS 500D, TDS 600B, & TDS 700D User Manual
Index–9
Runt, 3–103
Set Thresholds, 3–92, 3–95
Set to 50%, 3–79, 3–86, 3–103, 3–112
Set to ECL, 3–86, 3–103, 3–108, 3–112
Set to TTL, 3–86, 3–103, 3–108, 3–112
Slope, 3–85
Source, 3–84, 3–102, 3–104, 3–106, 3–107, 3–111
State, 3–95, 3–96
Telecom, 3–114
Thresholds, 3–104, 3–108
Time, 3–112
Timeout, 3–111, 3–112
Trigger When, 3–93, 3–95, 3–108
True for less than, 3–93
True for more than, 3–93
Type, 3–82, 3–83, 3–106, 3–111
Logic, 3–91, 3–95, 3–96
Pulse, 3–107
Pulse, 3–103
Type Pulse, 3–101
Width, 3–102, 3–106
<FB>MAIN TRIGGER OUTPUT</F>, BNC, 2–5
Map Math, Color menu, 3–50
Map Reference, Color menu, 3–50
Mask Counting, 3–64, 3–148
Mask inverting, 3–149
Mask margins, 3–152
Mask Testing, Bell, 3–152
Masks
creating user, 3–153
editing user, 3–153
Failure threshold, 3–152
Horizontal Position, 3–152
Minimum number of waveforms, 3–152
Pass/Fail testing, 3–151
storing user, 3–154
Math waveform
derivative. See Derivative math waveform
FFT. See FFT math waveform
integral. See Integral math waveform
Math waveforms, 3–209
Disallowed in DPO, 3–67
Incompatible with DPO, 3–66
Math, Color menu, 3–50
Math1/2/3, More menu, 3–209
Max Value, Color menu, 3–52
Maximum, 3–127, Glossary–7
Mean, 3–127, 3–147, Glossary–8
Mean +– 1 StdDev, 3–147
Mean +– 2 StdDev, 3–147
Mean +– 3 StdDev, 3–147
Mean dBm, 3–128, A–10
MEASURE button, 3–129, 3–148
Measure Delay menu
Create Measrmnt, 3–135
Delay To, 3–134
Edges, 3–135
Measure Delay To, 3–134
OK Create Measurement, 3–135
Measure Delay To, Measure Delay menu, 3–134
Measure menu, 3–129, 3–136
Gating, 3–131
High Ref, 3–133
High-Low Setup, 3–132
Histogram, 3–132
Low Ref, 3–133
Mid Ref, 3–133
Mid2 Ref, 3–133
Min-Max, 3–132
Reference Levels, 3–132
Remove Measrmnt, 3–130, 3–136
Select Measrmnt, 3–129, 3–134, 3–148
Set Levels in % units, 3–133
Snapshot, 3–136
Statistics, 3–137, 3–138
Measurement
Amplitude, 3–126, Glossary–1
Area, 3–126, Glossary–2
Burst width, 3–126, Glossary–2
Cycle area, 3–126, Glossary–3
Cycle mean, 3–126, Glossary–3
Cycle RMS, 3–127, Glossary–3
Delay, 3–134, Glossary–3
Duty cycle, 2–23, Glossary–8, Glossary–9
Extinction %, 3–128
Extinction dB, 3–128
Extinction Ratio, 3–128
Fall time, 3–127
Frequency, 2–22, 3–127, Glossary–5
Gated, Glossary–5
High, 3–127, Glossary–6
Histogram, 3–148
Histogram counting, 3–145
Hits in Box, 3–147
Low, 3–127, Glossary–7
Mask Counting, 3–148
Maximum, 3–127, Glossary–7
Mean, 3–127, 3–147, Glossary–8
Mean +– 1 StdDev, 3–147
Mean +– 2 StdDev, 3–147
Mean +– 3 StdDev, 3–147
Mean dBm, 3–128
Median, 3–147
Minimum, 3–127, Glossary–8
Negative duty cycle, 3–127
Negative overshoot, 3–127

Tektronix TDS 784D Specifications

General

Brand	Tektronix
Model	TDS 784D
Category	Test Equipment
Language	English