Command Descriptions
2−152
TDS200/1000/2000 Series Oscilloscope Programmer Manual
TRIGger:MAIn:VIDeo:SOUrce
Sets or queries the source for the video trigger. This is equivalent to
selecting the Source option in the Video trigger menu.
Trigger
TRIGger:MAIn:VIDeo:SOUrce {CH<x> | EXT | EXT5}
TRIGger:MAIn:VIDeo:SOUrce?
CH<x> specifies one of the allowable input channels.
EXT specifies the external input (not available with TDS224
oscilloscopes).
EXT5 specifies the external input, attenuated by a factor of 5 (not
available with TDS224 oscilloscopes).
TRIGger:MAIn:VIDeo:SOUrce CH1
selects channel 1 as the source for the main video trigger.
TRIGger:MAIn:VIDeo:STANDard
NOTE. You can use this command ONLY with the TDS1000 and
TDS2000 series.
Sets or queries the video trigger standard. This is equivalent to
selecting the Standard option in the Trigger/Video menu.
Trigger
Group
Syntax
Arguments
Examples
Group