Need help?Do you have a question about the Tektronix TDS1012 and is the answer not in the manual?
General| Bandwidth | 100 MHz |
|---|---|
| Sample Rate | 1 GS/s |
| Channels | 2 |
| Memory Depth / Record Length | 2.5k points |
| Display Type | LCD |
| Display | 5.7 inch |
| Vertical Resolution | 8 bits |
| Timebase Range | 5 ns/div to 50 s/div |
| Display Resolution | 320 x 240 pixels |
| Trigger Modes | Edge, Video, Pulse Width |
| Math Functions | Add, Subtract, Multiply, Divide, FFT |
| Weight | 2 kg (4.4 lbs) |
| Dimensions | 13.3 x 6.3 x 5.9 inches (338 x 160 x 150 mm) |
| Connectivity | USB |
| Input Impedance | 1 MΩ |
| Power Supply | 100-240 VAC, 45-440 Hz |
Safety precautions to prevent fire and personal injury during operation.
Instructions for installing the oscilloscope, including power cord and security loop.
Guides for functional check, probe safety, and probe compensation procedures.
Explains the routine to optimize the oscilloscope signal path for accurate measurements.
Explains the trigger's role in acquiring and displaying waveforms.
Details signal acquisition modes and how to scale/position waveforms.
Covers measurement methods using graticule, cursors, and automatic functions.
Covers cursor measurements, signal detail analysis, and capturing single-shot events.
Details input coupling, impedance, voltage, vertical resolution, and ranges.
Covers trigger sensitivity, level range, measurement accuracy, and pulse width trigger specs.
Lists general specs like display, power, environmental conditions, and mechanical details.
Provides P2200 probe specifications, certifications, and compliance information.
To Next Page
